Pike perch prey according to Dr. Liebig

is slipped over the outer cover, straight Design, snug fit with an inner dimension of approx. 54 x 45 cm Height 3,5 cm, weight approx.1,5 kg

One stainless steel ventilation grille each in the wooden frame and one bottom slide as a slide-in cassette, can be used variably from the top or bottom at the back Flight hole closure and mouse wedge Closure flaps at the front and back Outer dimensions approx. 52 x 42 cm, height 12 cm

2-part consisting of large-area pollen comb made of plastic fabric with Ø 0.5 mm holes and pollen collecting frame. Both frames are inserted through the rear working flap without opening the box

combines top ventilator and intermediate bottom. For mounting on the frames, so that the bee colonies do not get dizzy when wandering. With stainless steel ventilation grille and sliders. Additionally with closable flight hole, for use as intermediate floor with proboscis contact. Height approx. 3 cm, weight approx. 1 kg

made of polyethylene PE-plastic fixed, short approach nose large area ventilation Bottom slider for varroa control Flight hole closure and mice wedge Size approx. 54 x 43 cm, height 4,5 cm

for 10 Zander frames of 477 mm x 220 mm, display window approx. 32 cm x 13 cm, weather protection edge made of galvanised sheet metal above the display window, with insulation plate, glass pane and closing plate with split pin ring for opening Height 23 cm, weight approx. 4 kg

consisting of: one 4-piece bottom with stainless steel Varroa grid and bottom slider three separators one Liebig Zander frame one Liebig wooden lid Height approx. 35,5 cm, weight approx. 8 kg

for 5 frames Zander with 477 x 220 mm if you join 2 vertical half frames together, as shown in the picture together, you get a whole frame. Price per piece

Plastic pallet suitable for one hive e.g. Segeberger, Franken, Liebig, 11er normal measure, Herold and Dadant. Outer dimensions approx. 440 x 530 mm Height approx. 150 mm, weight approx. 1.5 kg

Compact, solid wooden floor with stainless steel ventilation grille and lateral recessed grips according to beekeeping master Werner Schundau Floor slider for varroa control with additional handle Flight hole closure and mice wedge Height approx. 11 cm, weight approx. 2,5 kg

Base plate made of glued laminated wood, provided with a 3.5 cm high frame construction Flight hole closure and mouse wedge of 36 cm length Outer dimensions with base plate approx. 58 x 42 cm, height 4.5 cm, weight 1.8 kg

Stainless steel ventilation grille Flight hole closure and mice wedge on the longitudinal side and not on the front side Bottom slider for varroa control made of light-coloured plastic, stable and boil-proof with varroa counting caros of 5 x 5 cm Height approx. 12 cm, weight approx. 3 kg Price without construction barrier/fly board

for the raised installation of the high floor Art. 2377. At the same time there is an additional approach for the bees of 15 cm. Length 66 cm, width 42 cm Height 11 cm, weight approx. 1.5 kg

Stainless steel ventilation and varroa grids Bottom slider for varroa control, with additional handle on the back Turning wedge with two cutouts Outer dimensions 52 x 42 cm, height 10 cm, Weight approx. 2,5 kg

additional approach of 20 cm, with galvanized Hooks for self-assembly