Segeberger booty

is slipped over the outer cover, galvanized, straight fit Contact surface inside: 50,5 x 50,5 cm Height 10.5 cm, weight approx. 2.2 kg

is put over the outer cover, galvanized, semi-conical with slight overhang Contact surface inside: 50,5 x 50,5 cm Height 10 cm, weight approx. 2,1 kg

is put over the outer cover, galvanized, semi-conical with slight overhang Contact surface inside: 50,5 x 50,5 cm Height 10 cm, weight approx. 2,1 kg

made of 2 mm thick plastic with angle cover and aluminium perforated plate, to be placed on the rebate of a Empty frame, size approx. 43.5 x 43.5 x 10 cm

consisting of a wooden frame with flight hole, removable intermediate floor plate with two bung holes, covers and round bee flights, wire frame with stainless steel ventilation grid. Thus 6-fold usable: escape divider, intermediate floor with proboscis contact, closed intermediate floor, upper ventilator, upper flight hole and feeding grid

consisting of a wooden frame with flight hole, removable intermediate floor plate with two bung holes, covers and round bee flights. Thus 2-fold usable as a flight partition or as a closed intermediate floor

made of wood with rebate, consisting of wooden frame with bung plate and large bee flight

combines top ventilator and intermediate bottom. For mounting on the frames, so that the bee colonies do not get dizzy when wandering. With stainless steel ventilation grille and fold. Additionally with closable flight hole, for use as an intermediate floor with proboscis contact.

for up to 3 litres of liquid feed. The emergency feeder is placed between the top frame and the lid and is equipped with a middle sieve insert made of tin bronze. Total height approx. 5 cm, weight approx. 1 kg

consisting of a 6 cm thick wooden frame with fold and two mutually sliding acrylic glass panes. Practical aid for honey harvesting, colony inspection or scion formation

for support on the frame rebate Size 435 x 435 mm, 1 mm thick

two-part, consisting of a lower wooden frame with flight hole and enclosed, fine stainless steel grille and an upper wooden frame with enclosed aluminium Varroa fall-through grille Outer dimensions approx. 500 x 495 mm

made of stainless steel, is clamped over the lid in the recessed grips of the top frame External dimensions approx. 50 x 15 cm, width 1.5 cm

consisting of: one 4-piece bottom with stainless steel Varroa grid and bottom slider three separators one Segeberger wooden frame one Segeberger wooden lid Height 38 cm, weight approx. 12 kg

for 11 frames normal size with 223 mm height, with all-round handle strip, display window, insulation panel, glass pane and closing plate

One stainless steel ventilation grille each in the wooden frame and one bottom slide as a slide-in cassette, can be used variably from the top or bottom at the back Flight hole closure and mouse wedge Closure flaps at the front and back Outer dimensions 50 x 50 cm, height 12 cm